The computer-controlled Aquabot is pre-programmed by Aqua Products, Inc. to scrub, vacuum and filter dirt and debris from the floor, walls, waterlines and steps of all sizes, shapes and surface type of swimming pools in six hours or less -- automatically.
Features:- The lightweight Aquabot has its own pump and microfiltration bag located inside its body and operates completely independent of the main pool filter, eliminating the need for messy, bulky hoses and “costly to operate” booster pumps.
- Engineered for reliable, worry free operation, the Aquabot cannot become stuck on stairs or ladders, or become tangled in hoses like other pool cleaners. Just take the Aquabot out of the box and put it in your pool - No Installation Required.
- Aquabot Scrubbing Action - Front and rear rotating scrubbing brushes, powered by Aquabot’s internal drive motor, loosen heavy dirt and fine particles to be vacuumed and trapped in the microfilter bag.
- Aquabot Vacuuming - The Aquabot’s exceptionally high suction power and large vacuum intake ports enable it to vacuum up all types of dirt and debris.
- Aquabot Built-in Filtration System - The Aquabot will clean and purify thousands of gallons of water per hour. The Aquabot is equipped with an expansive, reusable microfilter bag that has the capacity to hold many leaves and twigs and is capable of filtering out all types of fine particles including sand, silt, algae and bacteria. The filter bag can be easily removed and rinsed clean. And, since debris goes into your Aquabot, not your pool filter, backwashing and cleaning cartridges is reduced by up to 80% saving thousands of gallons of water, chemicals, the environment and your filter.
- Better Chemical Distribution - As a result of Aquabot’s heavy-duty pumping action, the pool’s bottom and surface water are mixed, raising water temperature below while reducing evaporation above. This decreases energy bills and creates a more even distribution of chemicals, which normally settle to the pool floor.
- No Installation - Operation is as simple as dropping the Aquabot into your pool, plugging it into its 24V transformer and pushing a button. It does the rest by itself. The Aquabot is the safest and easiest cleaner to use, and operating costs are little more than 10 cents a day.
- Low maintenance - Constructed of corrosion-proof materials, with fewer than 10 moving parts, the Aquabot requires little or no maintenance.
The Aquabot drastically reduces the frequency of wasteful backwashing, saving thousands of gallons of water per year and reducing chemical consumption by as much as 30%. With the Aquabot at work in your pool you can even decrease the running time of your pool’s filtration system by as much as 60%.
The Aquabot Classic is the entry level automatic pool cleaner for residential pools. Operating independently of the the main pool filter, the Aquabot works with no hoses, no hookups, no booster pumps or suction lines. Just place it in the water, push a button and that's it! The pool gets cleaned automatically.
Like all other Aquabots, the Aquabot Classic utilizes a highly efficient, reusable filter bag and power driven scrubbing brushes. The robot is capable of filtering unwanted debris as small as 2 microns in size, yet still allows up to 4000 gallons of water to flow through per hour. This results in the removal of sand, silt, hair,metal particles,bacteria, and most algae. In addition, large debris such as acorns, leaves, and twigs, are quickly and permanently removed. This leaves you with a cleaner, healthier and more beautiful pool without clogging up your main filter. An optional mesh filter allows for the quick cleanup of leaves after storms.
